
LEANTEC
LA1206-10
Max. Payload
10 kg
Max. Reach
1206 mm
IP Rating
IP54
Repeatability
±0.05 mm
No. of Axes
6
Weight
76 kg

Model | LA1206-10 | |
No. of Axes | 6 | |
Max. Payload (kg) | 10 | |
Max. Reach (mm) | 1206 | |
Repeatability (mm) | ±0.05 | |
Range of Motion | J1 (°) | ±170 |
J2 (°) | +125/-95 | |
J3 (°) | +65/-195 | |
J4 (°) | ±170 | |
J5 (°) | ±120 | |
J6 (°) | ±360 | |
Maximum Speed | J1 (°/s) | 297 |
J2 (°/s) | 223 | |
J3 (°/s) | 220 | |
J4 (°/s) | 480 | |
J5 (°/s) | 360 | |
J6 (°/s) | 705 | |
Motor Power per Axis | J1 (kw) | 1 |
J2 (kw) | 1 | |
J3 (kw) | 0.4 | |
J4 (kw) | 0.2 | |
J5 (kw) | 0.1 | |
J6 (kw) | 0.1 | |
Weight (kg) | ≈76 | |
Installation | Floor/Upside-down/Angle | |
IP Rating | IP54 | |
Operating Conditions | Ambient Temperature: 0~45°C Ambient Humidity: Typically below 20~80% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) |

Model | LA580-4H (Hollow Wrist) | |
No. of Axes | 6 | |
Max. Payload (kg) | 4 | |
Max. Reach (mm) | 580 | |
Repeatability (mm) | ±0.02 | |
Range of Motion | J1 (°) | ±170 |
J2 (°) | +130/-90 | |
J3 (°) | +55/-200 | |
J4 (°) | ±170 | |
J5 (°) | ±120 | |
J6 (°) | ±360 | |
Maximum Speed | J1 (°/s) | 450 |
J2 (°/s) | 337 | |
J3 (°/s) | 300 | |
J4 (°/s) | 610 | |
J5 (°/s) | 550 | |
J6 (°/s) | 823 | |
Motor Power per Axis | J1 (kw) | 0.4 |
J2 (kw) | 0.2 | |
J3 (kw) | 0.1 | |
J4 (kw) | 0.1 | |
J5 (kw) | 0.05 | |
J6 (kw) | 0.1 | |
Weight (kg) | ≈22 | |
Installation | Floor/Upside-down/Angle | |
IP Rating | IP67 | |
Operating Conditions | Ambient Temperature: 0~40°C Ambient Humidity: Typically below 20~80% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) |

Model | LA707-7H (Hollow Wrist) | |
No. of Axes | 6 | |
Max. Payload (kg) | 7 | |
Max. Reach (mm) | 707 | |
Repeatability (mm) | ±0.02 | |
Range of Motion | J1 (°) | ±170 |
J2 (°) | +135/-96 | |
J3 (°) | +65/-195 | |
J4 (°) | ±170 | |
J5 (°) | ±120 | |
J6 (°) | ±360 | |
Maximum Speed | J1 (°/s) | 440 |
J2 (°/s) | 355 | |
J3 (°/s) | 440 | |
J4 (°/s) | 480 | |
J5 (°/s) | 450 | |
J6 (°/s) | 900 | |
Motor Power per Axis | J1 (kw) | 0.75 |
J2 (kw) | 0.75 | |
J3 (kw) | 0.4 | |
J4 (kw) | 0.2 | |
J5 (kw) | 0.1 | |
J6 (kw) | 0.1 | |
Weight (kg) | ≈50 | |
Installation | Floor/Upside-down/Angle | |
IP Rating | IP67 | |
Operating Conditions | Ambient Temperature: 0~45°C Ambient Humidity: Typically below 20~80% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) |

Model | LA906-7 (Extended) | |
No. of Axes | 6 | |
Max. Payload (kg) | 7 | |
Max. Reach (mm) | 906 | |
Repeatability (mm) | ±0.03 | |
Range of Motion | J1 (°) | ±170 |
J2 (°) | +130/-96 | |
J3 (°) | +65/-195 | |
J4 (°) | ±170 | |
J5 (°) | ±120 | |
J6 (°) | ±360 | |
Maximum Speed | J1 (°/s) | 335 |
J2 (°/s) | 355 | |
J3 (°/s) | 355 | |
J4 (°/s) | 480 | |
J5 (°/s) | 450 | |
J6 (°/s) | 705 | |
Motor Power per Axis | J1 (kw) | 0.75 |
J2 (kw) | 0.75 | |
J3 (kw) | 0.4 | |
J4 (kw) | 0.2 | |
J5 (kw) | 0.1 | |
J6 (kw) | 0.1 | |
Weight (kg) | ≈52 | |
Installation | Floor/Upside-down/Angle | |
IP Rating | IP67 | |
Operating Conditions | Ambient Temperature: 0~45°C Ambient Humidity: Typically below 20~80% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) |

Model | LA1442-12 | |
No. of Axes | 6 | |
Max. Payload (kg) | 12 | |
Max. Reach (mm) | 1442 | |
Repeatability (mm) | ±0.03 | |
Range of Motion | J1 (°) | ±170 |
J2 (°) | +145/-105 | |
J3 (°) | +70/-210 | |
J4 (°) | ±270 | |
J5 (°) | ±135 | |
J6 (°) | ±360 | |
Maximum Speed | J1 (°/s) | 245 |
J2 (°/s) | 245 | |
J3 (°/s) | 290 | |
J4 (°/s) | 435 | |
J5 (°/s) | 450 | |
J6 (°/s) | 705 | |
Motor Power per Axis | J1 (kw) | 1.5 |
J2 (kw) | 1.5 | |
J3 (kw) | 0.75 | |
J4 (kw) | 0.2 | |
J5 (kw) | 0.2 | |
J6 (kw) | 0.2 | |
Weight (kg) | ≈115 | |
Installation | Floor/Upside-down/Angle | |
IP Rating | IP67 | |
Operating Conditions | Ambient Temperature: 0~45°C Ambient Humidity: Typically below 20~80% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) |

Model | LA1813-25 | |
No. of Axes | 6 | |
Max. Payload (kg) | 25 | |
Max. Reach (mm) | 1813 | |
Repeatability (mm) | ±0.05 | |
Range of Motion | J1 (°) | ±180 |
J2 (°) | +156/-99 | |
J3 (°) | +75/-200 | |
J4 (°) | ±180 | |
J5 (°) | ±135 | |
J6 (°) | ±360 | |
Maximum Speed | J1 (°/s) | 204 |
J2 (°/s) | 186 | |
J3 (°/s) | 182 | |
J4 (°/s) | 492 | |
J5 (°/s) | 450 | |
J6 (°/s) | 705 | |
Motor Power per Axis | J1 (kw) | 3 |
J2 (kw) | 3 | |
J3 (kw) | 1.5 | |
J4 (kw) | 0.4 | |
J5 (kw) | 0.4 | |
J6 (kw) | 0.4 | |
Weight (kg) | ≈256 | |
Installation | Floor/Upside-down/Angle | |
IP Rating | IP65 (Wrist: IP67) | |
Operating Conditions | Ambient Temperature: 0~45°C Ambient Humidity: Typically below 75% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) |

Model | LA1813-35 | |
No. of Axes | 6 | |
Max. Payload (kg) | 35 | |
Max. Reach (mm) | 1813 | |
Repeatability (mm) | ±0.05 | |
Range of Motion | J1 (°) | ±180 |
J2 (°) | +156/-99 | |
J3 (°) | +75/-200 | |
J4 (°) | ±180 | |
J5 (°) | ±135 | |
J6 (°) | ±360 | |
Maximum Speed | J1 (°/s) | 204 |
J2 (°/s) | 186 | |
J3 (°/s) | 182 | |
J4 (°/s) | 310 | |
J5 (°/s) | 360 | |
J6 (°/s) | 444 | |
Motor Power per Axis | J1 (kw) | 3 |
J2 (kw) | 3 | |
J3 (kw) | 1.5 | |
J4 (kw) | 0.4 | |
J5 (kw) | 0.4 | |
J6 (kw) | 0.4 | |
Weight (kg) | ≈256 | |
Installation | Floor/Upside-down/Angle | |
IP Rating | IP65 (Wrist: IP67) | |
Operating Conditions | Ambient Temperature: 0~45°C Ambient Humidity: Typically below 75% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) |
Product Manual
【Disclaimer】
By clicking the product manual link, you will be leaving this website. The external link is provided solely for your convenience and information.
Please note that the external website is maintained by a third party, and this site is not responsible for any loss or damage incurred from its use.
Applicable Industries
Leantec robotic arms are purpose-built for the metalworking industry, offering flexible solutions for a wide range of metal processing scenarios.

Fasterner

Plumbing

Bicycle

Automotive

Sheet Metal

Hand Tool