LEANTEC
LC1000-10
Max. Payload
10 kg
Max. Reach
1000 mm
IP Rating
IP66
Repeatability
±0.03 mm
No. of Axes
6
Weight
43 kg
| Model | LC1000-10 | |
| No. of Axes | 6 | |
| Max. Payload (kg) | 10 | |
| Max. Reach (mm) | 1000 | |
| Repeatability (mm) | ±0.03 | |
| Range of Motion | J1 (°) | ±360 |
| J2 (°) | ±135 | |
| J3 (°) | +63°/-243° | |
| J4 (°) | ±360 | |
| J5 (°) | ±180 | |
| J6 (°) | ±360 | |
| Joints are capable of ±360° rotation; however, due to application constraints, actual joint movement may be limited. Please pay attention during operation. | ||
| Maximum Speed | J1 (°/s) | 100 |
| J2 (°/s) | 100 | |
| J3 (°/s) | 150 | |
| J4 (°/s) | 150 | |
| J5 (°/s) | 180 | |
| J6 (°/s) | 180 | |
| Weight (kg) | 43 | |
| Installation | Floor/Upside-down/Angle | |
| IP Rating | IP66 | |
| Operating Conditions | Ambient Temperature: 0~50°C Ambient Humidity: Typically below 75% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) | |
| Control Cabinet Specifications | Input Voltage | Single-phase 200-230VAC, 50Hz/60Hz |
| Dimensions | 445.2mm x 318.8mm x 536mm | |
| Model | LC800-5 | |
| No. of Axes | 6 | |
| Max. Payload (kg) | 5 | |
| Max. Reach (mm) | 800 | |
| Repeatability (mm) | ±0.02 | |
| Range of Motion | J1 (°) | ±360 |
| J2 (°) | ±135 | |
| J3 (°) | + 63°/-243° | |
| J4 (°) | ±360 | |
| J5 (°) | ±180 | |
| J6 (°) | ±360 | |
| Joints are capable of ±360° rotation; however, due to application constraints, actual joint movement may be limited. Please pay attention during operation. | ||
| Maximum Speed | J1 (°/s) | 180 |
| J2 (°/s) | 180 | |
| J3 (°/s) | 180 | |
| J4 (°/s) | 180 | |
| J5 (°/s) | 200 | |
| J6 (°/s) | 200 | |
| Weight (kg) | 25 | |
| Installation | Floor/Upside-down/Angle | |
| IP Rating | IP66 | |
| Operating Conditions | Ambient Temperature: 0~50°C Ambient Humidity: Typically below 75% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) | |
| Control Cabinet Specifications | Input Voltage | Single-phase 200-230VAC, 50Hz/60Hz |
| Dimensions | 445.2mm x 318.8mm x 536mm | |
| Model | LC1300-15 | |
| No. of Axes | 6 | |
| Max. Payload (kg) | 15 | |
| Max. Reach (mm) | 1300 | |
| Repeatability (mm) | ±0.05 | |
| Range of Motion | J1 (°) | ±360 |
| J2 (°) | ±135 | |
| J3 (°) | +60°/-240° | |
| J4 (°) | ±360 | |
| J5 (°) | ±180 | |
| J6 (°) | ±360 | |
| Joints are capable of ±360° rotation; however, due to application constraints, actual joint movement may be limited. Please pay attention during operation. | ||
| Maximum Speed | J1 (°/s) | 80 |
| J2 (°/s) | 80 | |
| J3 (°/s) | 120 | |
| J4 (°/s) | 120 | |
| J5 (°/s) | 150 | |
| J6 (°/s) | 150 | |
| Weight (kg) | 60 | |
| Installation | Floor/Upside-down/Angle | |
| IP Rating | IP66 | |
| Operating Conditions | Ambient Temperature: 0~50°C Ambient Humidity: Typically below 75% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) | |
| Control Cabinet Specifications | Input Voltage | Single-phase 200-230VAC, 50Hz/60Hz |
| Dimensions | 445.2mm x 318.8mm x 536mm | |
| Model | LC1300-8 | |
| No. of Axes | 6 | |
| Max. Payload (kg) | 8 | |
| Max. Reach (mm) | 1300 | |
| Repeatability (mm) | ±0.03 | |
| Range of Motion | J1 (°) | ±360 |
| J2 (°) | ±135 | |
| J3 (°) | +63°/-243° | |
| J4 (°) | ±360 | |
| J5 (°) | ±180 | |
| J6 (°) | ±360 | |
| Joints are capable of ±360° rotation; however, due to application constraints, actual joint movement may be limited. Please pay attention during operation. | ||
| Maximum Speed | J1 (°/s) | 100 |
| J2 (°/s) | 100 | |
| J3 (°/s) | 150 | |
| J4 (°/s) | 150 | |
| J5 (°/s) | 180 | |
| J6 (°/s) | 180 | |
| Weight (kg) | 45 | |
| Installation | Floor/Upside-down/Angle | |
| IP Rating | IP66 | |
| Total Power Consumption | 700W | |
| Operating Conditions | Ambient Temperature: 0~50°C Ambient Humidity: Typically below 75% RH (non-condensing); short-term up to 90% RH (within 1 month) Vibration Acceleration: ≤ 4.9 m/s² (0.5G) | |
| Control Cabinet Specifications | Input Voltage | Single-phase 200-230VAC, 50Hz/60Hz |
| Dimensions | 445.2mm x 318.8mm x 536mm | |
Product Manual
【Disclaimer】
By clicking the product manual link, you will be leaving this website. The external link is provided solely for your convenience and information.
Please note that the external website is maintained by a third party, and this site is not responsible for any loss or damage incurred from its use.
Applicable Industries
Leantec robotic arms are purpose-built for the metalworking industry, offering flexible solutions for a wide range of metal processing scenarios.
Fasterner
Plumbing
Bicycle
Automotive
Sheet Metal
Hand Tool
